Bộ điều khiển cân DZ-410A thiết bị điều khiển máy đóng gói

Use parameter settings

1. Bagging

2. Press the start switch to clamp the bag

3. Start packing

4. Wait for the packaging to end

5. Automatic or manual bag drop

**Press the reset/clear bag button for 2 seconds to clear the number of bags.

**If you want to stop the packaging process, press the start switch, the system will automatically stop packaging

**Failure: The end of the packaging stops at the push bag, and the next step cannot be performed. Solution: Press the reset button after emptying the scale.

School name

1. Without placing the weight, press the [Clear] key, so that the display is 0.

2. Press [Settings] continuously, the calibration indicator light is on. The panel displays 0000 and changes the password to 1111

3. Press [Settings] to enter.

4. Modify the weight of the weight (no modification is required if there is no change].

5. Put on the weights and wait for a while to make the weighing platform stable. [Do not put the weight or the indicator light of the weighing platform is unstable]

6. When the calibration indicator light does not flash, press [Exit] to end the calibration.

port test debugging

1. Press [Settings] continuously, the calibration indicator light is on. The panel displays 0000, change the password to

2. Press [Set], the display value will be AD value, press set, output 1, start light on

 Press the up arrow to output 2- - the fast increase light is on

 Press the arrow - output 3 - slowly add light on

 After the start button is pressed, the packaging quantity light will be on