- Bộ lập trình PLC, cáp lập trình
- Màn hình HMI
- Cảm biến, phụ kiện
- Biến tần, khởi động mềm
- Máy cắt, Aptomat, khởi động từ
- Thiết bị đo lường, bảo vệ
- Thiết bị công nghiệp, tự động hóa
- Thủy lực, khí nén, van công nghiệp
- Motor, Servo motor, Servo Amplifier
- Thyristor, Module, SCR, SSR, Diode
- Phụ kiện tủ điện và vỏ tủ điện
- Cáp điện, ống bảo vệ cáp
- Thiết bị điện trung thế, truyền tải
- Thiết bị chống sét, kim thu sét
- Dụng cụ cầm tay, dụng cụ tool
- ATS, UPS, tụ bù, cuộn kháng
-
Thiết bị ngành xi măng, thép, nhiệt điện
-
Thiết bị thanh lí-hàng tháo máy
Đồng hồ đo nhiệt độ dầu máy biến áp lực, BWY(WTYK)-803AGTH
| No. | Model and name | The main purpose | Applications |
| 1 | BWY(WTYK)-803, 802 Thermostats | Measure the top oil temperature of the transformer and start, shut down the cooling system and send an alarm signal when the temperature reaches the set point | 1000kVA or more transformer |
| 2 | BWY(WTYK)-803, 802(TH) Thermostats | Same as 1 And apply to humid tropical occasions | 1000kVA Above transformer |
| 3 | BWY(WTYK)-803, 802(TH) Thermostats | Same as 2; and using composite temperature sensor technology, can output Pt100 thermal resistance signal at the same time | 8000kVA Above transformer |
| 4 | XMT Digital temperature controller | With BWY (WTYK)-803, 802A supporting, to achieve remote temperature remote control. Can also output standard signals for networking with computers | 8000kVA Above transformer |
| 5 | BWY(WTYK)-803, 802A/XMT Thermostat | Same as 3, 4, etc. can be replaced at the same time 1) WTZK-02 thermostat 2) Resistance thermometer 3) Switch 4) XCT or XMT, etc. 5) Transmitter | 8000kVA transformer or unattended substation |
Tình trạng sản phẩm:
Second, the main technical parameters
(a) BWY (WTYK) - 803, 802 type
1, normal working conditions: ambient temperature -20 °C ~ +55 °C
Relative humidity 5%~95%
2. Measurement range: (0—100)°C (0—120)°C (0—150)°C
3, indicating degree: 1.5
4、Temperature measuring components: Dimensions of external package (Φ14×150)mm, material is stainless steel, mounting thread M27×2
5. Switching performance: Setting range: full scale Setting degree: ±3°C Switching difference: (6±2)°C
Rated power: AC 250V 3A DC 250V 50W
Standard set point: 803 K1=55°C K2=65°C K3=80°C
802 K1=55°C K2=80°C
6, instrument installation size: compatible with WTYK-02, see the outline drawing.
7, outdoor performance: thermostat waterproof, waterproof performance of GB4208-93 IP55 in the provisions.
(B) BWY (WTYK) - 803, 802 (TH) type
1~6 and the same
Outdoor performance: in line with GB/T2433.3-93 "Basic Environmental Test Specifications for Electrical and Electronic Products Test Ca:
Constant Moisture Heat Test Method" Mildew resistance of exposed parts.
(c) BWY (WTYK) - 803, 802A (TH)
Same as above, with Pt 100 platinum resistance output.
XMT series thermometer
1. Display method: three and a half digits
2. Display error: ± (0.5% F.S+1 words) ± (1% F.S+1 words) second gear
3. Set point deviation: less than ± 1% FS
4 control point insensitive area: less than ± 0.5% FS
5. Output signal error: less than ± 1% FS
6. Output contact capacity: AC220V 3A (resistive load)
7.Temperature coefficient: deviation from 20°C±2°C in the range of 0°C-50°C
Its temperature coefficient is less than 0.05%/°C
8. Industrial power supply: 220V ± 10% 50Hz, power consumption is less than 5W
9. Working environment: non-corrosive gas with temperature 0°C-50°C and relative humidity ≤85%
10. Dimensions: 160×80×150 Hole size: 152 +1 ×76 +1
11. Weight: about 3kg
(a) BWY (WTYK) - 803, 802 type
1, normal working conditions: ambient temperature -20 °C ~ +55 °C
Relative humidity 5%~95%
2. Measurement range: (0—100)°C (0—120)°C (0—150)°C
3, indicating degree: 1.5
4、Temperature measuring components: Dimensions of external package (Φ14×150)mm, material is stainless steel, mounting thread M27×2
5. Switching performance: Setting range: full scale Setting degree: ±3°C Switching difference: (6±2)°C
Rated power: AC 250V 3A DC 250V 50W
Standard set point: 803 K1=55°C K2=65°C K3=80°C
802 K1=55°C K2=80°C
6, instrument installation size: compatible with WTYK-02, see the outline drawing.
7, outdoor performance: thermostat waterproof, waterproof performance of GB4208-93 IP55 in the provisions.
(B) BWY (WTYK) - 803, 802 (TH) type
1~6 and the same
Outdoor performance: in line with GB/T2433.3-93 "Basic Environmental Test Specifications for Electrical and Electronic Products Test Ca:
Constant Moisture Heat Test Method" Mildew resistance of exposed parts.
(c) BWY (WTYK) - 803, 802A (TH)
Same as above, with Pt 100 platinum resistance output.
XMT series thermometer
1. Display method: three and a half digits
2. Display error: ± (0.5% F.S+1 words) ± (1% F.S+1 words) second gear
3. Set point deviation: less than ± 1% FS
4 control point insensitive area: less than ± 0.5% FS
5. Output signal error: less than ± 1% FS
6. Output contact capacity: AC220V 3A (resistive load)
7.Temperature coefficient: deviation from 20°C±2°C in the range of 0°C-50°C
Its temperature coefficient is less than 0.05%/°C
8. Industrial power supply: 220V ± 10% 50Hz, power consumption is less than 5W
9. Working environment: non-corrosive gas with temperature 0°C-50°C and relative humidity ≤85%
10. Dimensions: 160×80×150 Hole size: 152 +1 ×76 +1
11. Weight: about 3kg
-
- Tiếp điểm hoa mai máy cắt ABB Tulip plum contact 630A-1250A new VD4, material number: 500595812 Liên hệ
-
- Cuộn hút đóng/cắt máy cắt ABB Closing locking solenoid new VD4 material number: 1VCR003131G0005/7 Liên hệ
-
- Cuộn hút đóng/cắt máy cắt ABB Closing electromagnet YC (110V/220V) HD4 material number: 507989805/7 Liên hệ
-
- Cuộn hút đóng/cắt máy cắt ABB Locking solenoid 110V/220V old VD4 material number: GCE9874103P0105/6 Liên hệ
THÔNG TIN THANH TOÁN
| |||||||||
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
TÂN THÀNH CAM KẾT
- Sản phẩm, hàng hóa chính hãng.
- Giá cả cạnh tranh.
- Dịch vụ chăm sóc khách hàng tận tâm.
Thông Tin Công Ty
Chính sách và quy định
Đã thông báo
Hỗ trợ khách hàng
THÔNG TIN LIÊN HỆ:
-------------------------------
CÔNG TY TNHH THIẾT BỊ CÔNG NGHIỆP TTH
Trụ sở: số 124 ngõ 79 Yên Hoà-Cầu giấy-HN
Kinh doanh 1 : 0816.861.515
Kinh doanh 2 : 0836.861.515
Kinh doanh 3 : 0926.511.515
Kinh doanh 4 : 0916.861.515
Kinh doanh 5 : 0888.868.515
Kinh doanh 6 : 0917.971.515
Website: http://tanthanh-automation.com
Website: http://thietbitudongtanthanh.com
Website: http://diencongnghieptanthanh.com
Email: tthkinhdoanh@gmail.com
Email: tthkinhdoanh01@gmail.com
