Cảm biến khoảng cách, Probe GJCT-15-E Air Pre-Gap Device Gap Measurement Probe (Linear 0-25mm)

" Series air pre-conditioner seal gap control system / air pre-conditioner gap device gap measuring probe (linear 0-25mm ) probe GJCT-15-E 懝擭

The probe GJCT-15-E is mainly installed on the bearing caps of various rotating machinery (such as steam turbines, compressors, fans and pumps). It is an electromagnetic sensor that cuts magnetic lines by a moving coil and outputs a voltage. Therefore, it does not require power supply during operation and is easy to install. Mounting position: Mounted vertically or horizontally on the vibration point to be tested. The probe is fixed with M10 × 1.5 screws.

The probe GJCT-15-E is equipped with a vibration monitoring and protection device, which can measure the bearing vibration of various rotating machinery. It can detect the failure of various rotating machinery at an early stage, output the standard 4-20mA current signal, and send it to PLC , DCS and DEH systems. .

Deyang Dongfang supplies all kinds of special sensors and probes for power plants and related spare parts:

Oil Motive LVDT Sensor 7000TD 0-350mm

Oil Motive LVDT Sensor 7000TD 0-350mm

TSI preamplifier CON041/916-120

Servo card W.39.Z.000360

Displacement sensor TD-1-150

LVDT oil motor stroke sensor DET-250B

Differential Pressure Transmitter 3051CD2A22A1AM5B4

LVDT oil motor stroke sensor DET-1000A

Magnetoresistive sensor ZS-01 L=80

Oil motive stroke sensor DET-50B

Vibration Probe TM0180-A05-B05-C03-D10

DEH speed probe D-075-02-01

DEH system speed probe 143.35.19.1

PLC output module 140DDO35300

High-level gauge external magnetic float and panel assembly ITA-10.0 range 853mm temperature 350 degrees Celsius

Active high resistance speed probe CS-3

Middle adjustment door LVDT sensor DET-600A

Displacement sensor TDZ-1E-45 0-160

LVDT stroke sensor DET-35A

LVDT displacement sensor DET700B

Sensor NA-1000D

LVDT sensor TDZ-1E-011

Stroke displacement sensor HTD-200-6

Medium voltage regulator door sensor DET-350B

LVDT oil motor stroke sensor 191.36.19 (1).09 ( ± 127mm)

DEH speed probe ZS-04 L=65

Displacement sensor HL-6-150-15

Pressure switch 439991-QAJ053

Oriental DF310580-90-10-02

Conductivity transmitter AX410/10001

Armored thermocouple WRNK2-291

Oriental DF310580-90-04-01

Main door displacement sensor DET-800A

Speed ​​card DF-ZXB1

Displacement sensor TDZ-1E-22

Pressure Controller EYD05LW 0-0.5MPA 750KPA

Gap measurement probe (linear 0-25mm ) probe

Displacement sensor TDZ-1G-01

Probe CWY-DO-813504

LVDT sensor HTD-300-3

Impact sensor ZS-01 L=100

Sensor CS-3-L190

Speed ​​sensor CS-2

LVDT sensor 4000TD 0-200mm

Bimetal thermometer WSS-581W

LVDT oil motor stroke sensor DET-1000A

Bentley (extension) cable 330106-05-30-10-02-00

Probe CS-1 L=100

Flame detector probe EFD-II-A-2

Stroke displacement sensor HTD-350-3

Speed ​​probe CS-1 L=90

Active probe CS-3-M16-L220

Displacement sensor DEA-LVDT-400-6

High-profile door oil motive sensor DET-1000A

Sensor DET-700A

Thermal resistance WZPK2-231-G1/PT100/300/6/0 ～ 250 °C

Speed ​​probe ZS-03 L=80

Middle adjustment door LVDT sensor DET500B

TSI preamplifier CON021/916-200

Middle door sensor DET-800A

Bolt electric heater ZJ-16.5-7(R)

High resistance probe ZS-01 L=65

Probe ZS-02 L=100

Governor cabinet frequency meter SFB-4005

Impact sensor CS-3-M10*1 L=130

Valve positioner V18345-1010551001

LVDT displacement sensor 8000TD 0-400mm

Oriental DF310580-90-02-00

Sensor 7000TD 0-350mm

Small machine low-profile door LVDT sensor 191.36.09.07 type range : ± 127mm

Card XSV-813-01

Oriental DF312508

Series air pre-conditioner seal gap control system / air pre-interval gap device gap measuring probe (linear 0-25mm ) probe GJCT-15-E